Key port information can also be found at: Website of the Maritime Database on Port of Matadi
Matadi Port is the most important maritime port of DRC with 90% maritime traffic (not including oil tankers). It has a handling capacity of 2,500,000 metric tons of cargo per year.
Matadi Port has started upgrading its installation according to ISPS code. The port is connected with Kinshasa by railroad.
The port is 1,610 meters long and equipped with 10 quays, this may allow “parking” of ten big ships at the same time.
Port Location and Contacts
The Democratic Republic of Congo
Province or District
Bas Congo, Matadi
Town or City (Closest location) with Distance (km)
Port's Complete Name
|Port de Matadi|
Managing Company or Port Authority
|SCTP (Société Commerciale des Transports et des ports)|
Management Contact Person
|J.P DIKENDA NZOLAMESO, Directeur du Département|
Closest Airport and Frequent Airlines to / from International Destinations
Airport Name: n/a
Most of the companies operating at Matadi Port are customs clearance agents and road transporters.
One of them:
G.T.M.: Alex MUKOLE, Chef d’Agence, +243991002524 / +243998530131 / +243898338920, firstname.lastname@example.org, email@example.com, website: www.gtmdrc.com
4.4 Democratic Republic of Congo Port and Waterways Company Contact List
The Port of Matadi is physically hampered by its handling equipment. Almost all of the rail mounted shore cranes are not operational and the remaining few functioning cranes are in an extremely fragile condition. Therefore, vessels wishing to call the port should carry their own cargo gear. The Matadi Port has recently put into service two Gantry cranes of 40T increasing its ability to stack containers and store a total of 6,700 TEUs.
The surrounding terrain at Matadi has limited the draft of vessels. Permissible draft for navigating the Congo River varies from time to time ranging between 19 ft and 22 ft. There are times when the draft on the Congo River has been reduced to 19 ft. / 5.80 meters and should be checked with the port authority in advance. During the rainy season the draft decreases and reaches from 19 ft to 20 ft. This reduction is due to the increase of sand in Mateba Island, which is on the way through Matadi Port. The decrease in the draft of the Congo River is one of the many reasons for the Matadi Port's congestion and results in river traffic suspension and berthing delays. The other reason for congestion is the fact that only 4 vessels can berth at a time in Matadi forcing other vessels to wait at Boma Port until completion of discharge and recharge.
This leads to a long queue at the transhipment port of Pointe Noire in the Republic of Congo. Slowdowns and delays as a result of the long waiting times before arriving at the port of Matadi can last up to 14 days instead of 2-3 days under normal circumstances. There is no formal priority establishment for humanitarian cargo per se. However, due to the very nature of the humanitarian activities, all cargo shipments are subject to preferential treatment at Matadi Port upon provision of all required documentation.
Yes / No
From <month> to <month>
|Yes||November to March|
Major Import Campaigns
Container Traffic (TEUs)
Handling Figures Bulk and Break Bulk
Break bulk (MT)
|same as above|
Port of Matadi berthing specifications
Type of Berth
Maximum Draft (m)
4 berths (berth 1, berth 2, berth 3, berth 4)
Berths 1 & 2 are under renovation now
Berth 4: 156
6.25 m max
3 berths (Berth 5, Berth 6, Berth 7)
Berth 5: 156
Berth 6: 176
Berth 7: 188
6.25 m max
Mix conventional & container
3 berths (berth 8, berth 9, berth 10)
Berth 8: 149
Berth 9: 167
Berth 10: 143
6.25 m max
The Silo Berth was created by the country’s largest flour milling company, Minoterie de Matadi (Midema) by refurbishing an unused part of the port in order to create an eleventh berth and free up one of the 10 original port berths for other vessels.
Imports - Bagged Cargo
Exports - Bagged Cargo
Imports and Exports - RoRo
1,2,3,4,5,6,7,8,9,10 (no vehicle export activities)
Average quay activity (2014/2015):
The Matadi Port equipment has been managed by a government funded company called SCTP (Société Générale des Transports et des Ports) since 2010.
Dockside crane, Container gantries and reach stacker are available.
Total Quantity and Capacity Available
Comments on Current Condition and Actual Usage
35 of 5 to 7 tons
Most of them are not in good working condition
3 lifting 45 tons each
Serviceable with frequent breakdowns
14 (45 tons capacity each)
10 belongs to the port and 4 are private
RoRo Tugmaster (w/
Grain Elevator w/
Available at the Silo berth in use by the flour milling company, Minoterie de Matadi (Midema)
32 (25 units lifting 2 to 5 tons, 7 units lifting 7 to 16 tons)
Not all of them are on duty
The reefer yard The silos of Midema, connected to quay 11.
Container Facilities Available
Container Freight Station (CFS)
Refrigerated Container Stations
Other Capacity Details
Daily Take Off Capacity (Containers per day)
Number of Reefer Stations (connection points)
Emergency Take-off Capacity (Give an indication)
Off take capacity of gang shift (in Containers per shift)
The container yard 1 (facing quay 5,6,7) can host 3,500 containers.
1.3 Democratic Republic of Congo Customs Information
The Matadi Port terminal is a multipurpose terminal allowing the handling of container, break bulk cargo, bagging and timber logs.
Grain and Bulk Handling are done at Berth 11 by the flour milling company, Minoterie de Matadi (Midema)
There are 8 warehouses for conventional cargo with a capacity of 8 to 10,000 T per warehouse.
The container terminal has a capacity of 60,000 m2 and 6,200 TEUs.
The General cargo storage yard has a capacity of 40,000 m2.
Number of Storage Facilities
Area (square meters)
same as above
same as above
The Governement owned company SCTP is the only stevedoring company in the Port of Matadi
|Others (break bulks)||19.00|
57 euros/20’ empty
65,5 euros/40’ empty
114 euros/20’ full
171 euros/40’ full
The Matadi Port is connected with Kinshasa by railroad. A detailed assessment on the railroad can be found in 2.4 Democratic Republic of Congo Railway Assessment. Matadi Port is the terminal of the 366 kmlong railway that links the two towns.
Matadi Port can also be reached by a 355 km paved road linking Kinshasa to Matadi. A detailed assessment of the road can be found in 2.3 Democratic Republic of Congo Road Network.
(Yes / No)
Current ISPS Level
Level 1 = Normal, Level 2 = Heightened, Level 3 = Exceptional