Page History

...

1. Make sure that the generator circuit breaker is open (if the generator does not have a circuit breaker: make sure that the installation main breaker is open).
2. Check the oil level.
3. Check the fuel level.
4. Check the water level (for water-cooled generators only).
5. Make sure that there is no leakage (no oil or fuel under the generator).
6. Start the generator.
7. Wait 2 minutes.
8. Close the circuit to the main circuit of the office or compound.
9. Record time of start on the associated log booklogbook.

Standard stopping procedure:

1. Warn users that the power will be cut.
2. Open the generator circuit breaker (if the generator does not have a circuit breaker: open the installation main breaker).
3. Wait 2 minutes and.
4. Stop the generator.
5. Record time of stoppage on the associated log booklogbook.
6. Refuel if necessary.

Care & Maintenance

...

To size a battery system, the following will be need to be determined:

• The maximum power the inverter has to be able to deliver to the installation.
• The amount of energy that must be stored in the battery to cover your needs.
• In some case, the power the charger can deliver to the batteries.

...